PALLETIZER AND END OF LINE AUTOMATION
Apiel produces cartesian palletizer, cartesian and scara robots for palletization; with our production of conveyor we are able to make complete end-line automation. To satisfy the needs of our customers we build systems according to customer specifications.
The productivity of palletizers, up to 14 picks per minutes. Cartesian palletizers and rotos are equippet with brushless servo motors or induction motors with inverters.
To complete the range of palletizers and robots for palletizing we can offer a wide range of grippers and interleaf applicators.
CARTESIAN PALLETIZER SERIES PCS
High-speed machine consisting of a tubular steel frame over which moves a gantry cartesian robot with 3 or 4 axes. Made in 3 different versions with 1,2 or 3 pallet positions: the vertical axis may be telescopic to reduce the vertical dimension. The machine is characterized by its high speed and the perimeter is completely free of mechanical parts. The highest productivity is 14 taken per minute; the maximum carrying capacity is 100 kg. One of the 5 models is a cheaper version made with three-phase induction motors and inverters. Each version can be supplied with three-phase induction motors and inverters (for applications at low cost and limited performance).
For more details go to page by clicking here
CARTESIAN PALLETIZER SERIES PCC
Machine consisting of a tubular steel frame within which moves a Cartesian robot with 3 or 4 axes. The robot does not protrude from the frame, allowing to have a vertical dimension rather content. The machine is made of 4 different versions with 1, 2 or 3 pallet positions. The machine is characterized by having one of the two long sides cluttered by the vertical axis of the robot. This machine is preferable in cases where the reduced vertical dimension is binding. The highest productivity is 12 taken per minute; maximum load capacity up to 100Kg (including gripper). Each version can be supplied with three-phase induction motors and inverters
For more details go to page by clicking here
SCARA ROBOTS
The scara palletizer is a machine capable of high palletizing on one or two pallet positions. The performance is similar to the anthropomorphic robot for palletising. We produce two models of Scara robot for palletizing: an high-load model, and a medium load model.
The height of palletizing is 2400mm for the high-load model and 1800mm for the medium model. The robot can move directly the pallets or / and an interleaf. The vertical dimension is contained, making it ideal for applications where vertical space available is reduced. The high-load scara model, has a capacity on the wrist of 180Kg, this capacity allows the simultaneous intake of more boxes and is therefore ideal for high productivity lines.
For more details go to page by clicking here
CARTESIAN ROBOT SERIES CS
This machine is suspended at a height by means of a series of support columns. Thanks to the sun support columns this machine is preferable in cases where it is necessary to have a few dimensions in plan. The maximum load reaches 60 kg. The vertical axis can be telescopic stroke greater than 1800mm.
For more details go to the page by clicking here
CARTESIAN ROBOT SERIE CC
The Cartesian robot series CC is a particularly efficient solution for palletizing. Thanks to its longitudinal axis vertical to the ground and its contained dimensions can palletize up to 3000mm. The transverse axis may cross the longitudinal axis to allow to position the lines of arrival of the product on the opposite side to the pallet with respect to the beam-to-length.
For more details go to the page by clicking here
GANTRY PALLETIZING ROBOT SERIES CP
The gantry palletizer, is used when there is the need to create islands of palletizing large, with different lines served from the same machine and with different pallet places. The vertical axis can be telescopic; the maximum payload is 180Kg. The robot is supported by a frame formed by a series of columns; these are the only overall dimensions in plan. The maximum height of palletization is 2500mm.
For more details go to page by clicking here
PALLETIZING GRIPPERS
Apiel is able to provide a wide series of grippers for palletizing:
- Grippers with a fixed and a movable flap, width of the flap 400 and 800mm
- Grippers with self centering flaps, flap width of 400, 800 and 1200 mm
- Grippers for filling cartons
- Grippers for rigid or soft bags
- Indipendent grippers for multiple grip independent, variable pitch
- Gripping vacuum groups with suckers
- Special grippers
For more details go to the page by clicking here
PALLET INTERLEAF FEEDER
The pallet interleaf feeders are autonomous groups that place the interlayer during the palletizing.
Apiel produces two different families of pallet interleaf feeders :the column pallet interleaf feeder and the rail one.
The column pallet interleafs feeders are the ideal solution to enslave a single pallet.
The rail pallet interleaf feeder can be used in applications where you have to enslave more pallets.
This model, not having space on the ground, is particularly suitable for applications where it is not easy to find support on the ground.
For more details go to the page by clicking here