STANDARD CARTESIAN PALLETIZER
The standard Cartesian palletizer presents the vertical axis protruding from the frame.
That do not have mechanical parts along the perimeter of the machine is allowed complete freedom of access and positioning of pallet conveyors.
Can be achieved in a single bay, double or triple.
The second bay can be used for a second palletizing station, a warehouse to store pallets or interlayers.
In versions with an height of palletizing above 1500mm, the vertical axis can be telescopic, to reduce the vertical dimension.
Essential features:
- Two sets of models with different orientation of the pallet, longitudinal and transverse.
- The series cross is made with 1, 2 or 3 stations palletizing.
- Suitable for installation of pliers for picking of pallet and interlayer.
- Rotation of the handling tool by means of pneumatic actuator (0-90) or with an electric servomotor.
- Versions with servo motors and productivity by up to 14 retail outlets.
- Low cost versions, with induction motors and inverter, with productivity up to eight retail outlets.
- For heights palletizing, higher than 1500mm, the vertical axis may be telescopic.
- Versions with servo motors, controlled by PLC Siemens S7-300.
- Versions with inverter and induction motors controlled by PLC Omron CJ1M.
- Operator panel, touch screen 5.7" color.
- Frame made of tubular steel powder-coated.
- Servo motors connected to the PLC with Profibus fieldbus.
- Linear movements are made with recirculating ball-bearing linear guides./li>
- Max lifting weight 50Kg with gripper.
- Maximum palletizing height: 1800mm.
- Perimeter protection in powder-coated steel mesh.
- Side security exit pallet, with safety light curtain and muting device.