PALLETIZER CARTESIAN MULTIPLE BAYS OF PALLET

The palletizer Cartesian multibaia presents the vertical axis protruding from the frame. The standard model can palletize 3 to 7 bays. A bay can be used for pallet storage and another for the stock interlayers.
In versions with heights greater than 1800mm palletizing, the vertical axis can be telescopic, to reduce the vertical dimension.

Palletizer multi bay

The main features are:











Palletizer multi bay: side view.










Outline of the palletizer multibay

The side drawing depicts an example of application with 5 stations palletizing, inventory and warehouse pallets flaps. The application provides for the enslavement of three lines from as many packers.









Pal multibaia schema

The drawing alongside shows an example of 3-palletizing stations, warehouses for pallets and interlayers. The lay-out of the island of palletizing is compact: the length is close to the width. Click image to enlarge.









CARTESIAN PALLETIZER OPEN

The palletizer Cartesian multiple open bay is a most economical solution for palletizing on multiple pallets. The machine lacks a frame: the robot illustrated below, runs on a rail longitudinal allowing to reach the palette to serve. The machine has some restrictions compared to the previous model: the pallets must be aligned, the cross travel is limited as the maximum height of pallet. The speeds are lower than the model described above. The economic benefits are sensitive. A bay can be used for pallet storage and another foot for the warehouse.

Palettizzatore multibaia aperto

The essential features are:
















Palettizzatore multibaia aperto

The lay-out side, is typical of the palletizer Cartesian open. The side of the machine, where the rail is positioned, it can not be crossed (the upper side of the drawing). For the input conveyor of the product and the pallets are available movinentazione of the other 3 sides.